Step 1. Open Packaging in order
Cut off these nylon straps of bolt box that are holding the cardboard box, and then take the cover off of the box. You will find a tool kit on the machine and put it aside.
![step 1 unboxing Thunder Bolt](https://www.thunderlaser.com/wp-content/uploads/2024/05/step-1-unboxing-Thunder-Bolt.webp)
Step 2. Remove foam and cardboard shell
![remove outer packaging](https://www.thunderlaser.com/wp-content/uploads/2024/05/remove-outer-packaging.jpg)
Step 4. Carefully remove stretch film
Carefully find a good location and go ahead. Pulling the saran wrap away and cut it off.
![step 3 unboxing Thunder Bolt](https://www.thunderlaser.com/wp-content/uploads/2024/05/step-3-unboxing-Thunder-Bolt.webp)
Step 5. Make sure all tools are present
Tool bag *1 includes:
workpiece pressing block module *2 air blower *1,
Phillips screwdriver *1 hex wrench set *1
cotton swab set *1 HF-100P exhaust fan *1
Exhaust pipe *2 PC-USB cable *1
Hose clamp *3 Power cord *1
Key switch key *1 Small Phillips screwdriver *1
Door cover key *4 Random USB flash drive *1
![aurora laser toolbox](https://www.thunderlaser.com/wp-content/uploads/2024/05/aurora-laser-toolbox.jpg)
Unboxing completed!