Laser Marking - Leather Card Holder| Thunder Laser

Introduction

Let’s turn your leather card holder into a unique statement piece! Laser marking adds permanent logos and custom designs with precision, enhancing both style and functionality.

Ready to personalize your leather card holder? Follow the steps below and make it truly yours!

Machine Used

Aurora Lite 50W

See more details about this machine→

Material Needed

Leather

Settings

Laser Marking
Speed: 1500mm/s
Marking Power: 20%
Frequency: 50kHz
Line interval: 0.05

Check out!

Step 1: Place the leather card holder

Put the leather card holder on the laser bed. Since it is flat in the center, the card holder will be well suited for laser marking.

Step 2: Import laser marking file and check out

Load your design into LightBurn software, adjusting its size and position to fit you card holder. Then make sure the laser marking parameters are set correctly.

Step 3: Don't miss the focus

Missing the focus is one of the biggest reasons for laser marking failure. So don’t forget to click the AF button for auto focus. Of course, manual focus is also effective.

When two red dots are displayed on the slate, it is out of focus. When the two light dots overlap each other, it means in focus.

Auto focus

Manual focus

Out of focus

Step 4: Ready to start laser marking

Press the frame button and check if the visual red light indicate the right area to be marked. The frame should be located in the middle of the card holder. If not, move the pattern positions until they align.

After checking, close the laser door and begin Aurora Lite’s operation.

Step 5: Monitor the card holder marking process

Stay near the machine throughout operation to monitor for any unusual sounds or alarms. This vigilance ensures safety during laser marking, as the energy is potent. Avoid looking directly at the laser beam, even with protective measures in place.

Step 6: Complete the laser marking

Once laser marking is complete, carefully open the door and get your personalized leather card holder. Laser marking does not produce toxic substances, and you can use the card holder after a simple cleaning!

Come and Try!

Laser marking leather card holder is a stylish and practical way to keep your essentials organized. With laser marking, you can add a personal touch—whether it’s your name, a logo, or a custom design—making it truly one of a kind. Perfect for work, travel, or as a thoughtful gift, the laser leather card holder is a simple yet classy everyday accessory!