Laser Marking - Damascus Style Knife

Introduction

Let’s turn an ordinary steel knife into a stunning Damascus-style masterpiece! Laser marking replicates the signature layered patterns and complex details of traditional Damascus steel, adding a distinctive touch to your own knife.

Ready to personalize your stainless steel knife? Follow the steps below and make it truly yours!

Machine Used

Aurora Lite 50W

See more details about this machine→

Material Needed

Stainless steel knife

Settings

Laser Marking
Speed: 1000mm/s
Marking Power: 16%
Frequency: 50kHz
Line interval: 0.02

Check out!

Step 1: Place the Stainless Steel Knife

Put the Zippo on the laser bed. Since it is flat in the center, the card holder will be well suited for laser marking.

Step 2: Import laser marking file and check out

Load Damascus style design into LightBurn software, adjusting its size and position to fit your knife. Then make sure the laser marking parameters are set correctly.

Step 3: Don't miss the focus

Missing the focus is one of the biggest reasons for laser marking failure. So don’t forget to click the AF button for auto focus.

Of course, manual focus is also effective. Hang the focal stick at the correct position under the lens, and then carefully adjust the Z-axis height. When the end of the focal stick just touches the surface of the knife, it is in focus!

Auto focus

Manual focus

Focal stick of manual focus

Knife in focus

Step 4: Ready to start laser marking

Press the frame button and check if the visual red light indicate the right area to be marked. The frame should be located in the middle of the knife. If not, move the pattern positions until they align.

After checking, close the laser door and begin Aurora Lite’s operation.

Step 5: Monitor the Knife marking process

Stay near the laser machine throughout operation to monitor for any unusual sounds or alarms. This door ensures safety during laser marking, as the energy is potent. Avoid looking directly at the laser beam, even with protective measures in place.

Step 6: Complete the laser marking

Once laser marking is complete, carefully open the door and get your Damascus style knife. Laser marking does not produce toxic substances, and you can use the knife after a simple cleaning!

Come and Try!

The laser marking Damascus-style knife combines the artistry of traditional Damascus steel with modern precision, creating a knife that’s both durable and visually striking. The unique layered pattern is forged through advanced laser marking, and paying to the ancient craft of Damascus steel-making. This knife represents both strength and beauty, making it an exceptional addition to any collection or a meaningful gift!