Laser Cutting - Bunny Napkin Holder

Introduction

Let’s craft laser cutting wooden Easter napkin holders! Featuring delicate egg and bunny designs, this festive piece brings charm and elegance to your holiday table while adding a touch of handcrafted beauty.

Read this post and enjoy a delightful laser-cutting experience!

Machine Used

Thunder Bolt 30W

See more details about this machine→

Material Needed

3mm plywood

Settings

Cutting

Speed:20mm/s
Max Power:25%
Min Power:10%

Before your work begins

Step 1: Place Your Plywood for Laser Cutting

Choose a flat plywood board on the laser honeycomb bed.

Step 2: Open the Holder File and Check the Laser Plywood Settings

Check out the design is important. Since there are a lot of parts, don’t miss anyone! And ensure that the parameters are set correctly to achieve the ideal laser cutting wooden Easter napkin holder. In addition, laser compensation is to be set.

If the min power is too low, it will cause the stroking corners will be too shallow and the cutting corners will not cut through; if the min power is too high, it will cause the stroking to cut through the corners and the laser cutting will be bad at the corners.

Step 3: Focus on the Plywood

Without focusing, your outcomes may fall short of expectations. So before starting, make sure you’ve rightly focused.

For focusing, you have two options: Auto Focus, which is simple—just press the AF button on the Thunder Bolt screen. Then you’re ready to have a laser cutting.

Step 4: Frame the Holder Design and Start Laser Cutting

When you click “Frame”, the red light will display the laser cutting area. This is a safe process, and the frame will align with the plywood. Once aligned, simply press “Start” to begin the plywood laser cutting with the Thunder Bolt!

Step 5: Monitor the Laser Cutting Process

To avoid any issues, carefully monitor the laser cutting, especially when unusual conditions like alarms arise.

Considering the laser cutting energy, for safety reasons, we advise against staring directly at the process, even with the laser door closed.

Step 6: Assemble the Easter Napkin Holder

When the laser cutting plywood is completed, it’s time to get it out. Then it’s just a fun assembly time to get the ideal wooden Easter napkin holder. Imagine the joy of assembling, as each piece clicks into place to create a wonderful Easter home decoration.

Come and Try!

Laser cutting on wooden Easter napkin holders adds a unique, festive touch while showcasing intricate craftsmanship and durability. Featuring charming egg and bunny designs, these holders are perfect for decorating your holiday table and enhancing seasonal celebrations. Laser cutting offers a stylish and creative way to bring Easter cheer to any setting!