Laser Cutting - Easter Egg Basket

Introduction

Let’s craft a laser-cut wooden Easter egg basket! This beautifully designed decorative piece adds a festive touch to your Easter celebrations with intricate details and a charming wooden finish.

Ready to give your projects the creative edge they deserve? Read this post and enjoy a joyful laser-cutting experience!

Machine Used

Thunder Bolt 30W

See more details about this machine→

Material Needed

3mm plywood

Settings

Cutting

Speed:15mm/s
Max Power:45%
Min Power:10%

Before your work begins

Step 1: Place Your Plywood for Laser Cutting

Choose a flat plywood board on the laser honeycomb bed.

Step 2: Open the Basket File and Check the Laser Plywood Settings

Check out the design is important. Since there are a lot of parts, don’t miss anyone! And ensure that the parameters are set correctly to achieve the ideal laser cutting Easter egg basket. In addition, laser compensation is to be set.

If the min power is too low, it will cause the stroking corners will be too shallow and the cutting corners will not cut through; if the min power is too high, it will cause the stroking to cut through the corners and the laser cutting will be bad at the corners.

Step 3: Focus on the Plywood

Without focusing, your outcomes may fall short of expectations. So before starting, make sure you’ve rightly focused.

For focusing, you have two options: Auto Focus, which is simple—just press the AF button on the Thunder Bolt screen. Then you’re ready to have a laser cutting.

Step 4: Frame the Easter Egg Basket Design and Start Laser Cutting

When you click “Frame”, the red light will display the laser cutting area. This is a safe process, and the frame will align with the plywood. Once aligned, simply press “Start” to begin the plywood laser cutting with the Thunder Bolt!

Step 5: Monitor the Laser Cutting Process

To avoid any issues, carefully monitor the laser cutting, especially when unusual conditions like alarms arise.

Considering the laser cutting energy, for safety reasons, we advise against staring directly at the process, even with the laser door closed.

Step 6: Assemble the Easter Egg Basket

When the laser cutting plywood is completed, it’s time to get it out. Then it’s just a fun assembly time to get the ideal Easter egg basket. Imagine the joy of assembling the basket, as each piece clicks into place to create a beautiful Ester decoration.

Come and Try!

Laser cutting on wooden Easter egg baskets adds a unique, festive touch while showcasing intricate craftsmanship and durability. Whether you’re decorating for an Easter gathering, creating a seasonal centerpiece, or crafting a special keepsake, laser cutting offers a stylish and charming way to celebrate the holiday with creativity!