Introduction
Let’s turn your candy box into a unique statement piece! Laser marking adds permanent logos and custom designs with precision, enhancing both style and functionality.
Ready to personalize your candy box? Follow the steps below and make it truly yours!
Machine Used
Aurora Lite 50W
Material Needed
Coated Metal Candy Box
Settings
- Laser Marking
- Speed: 1700mm/s
- Marking Power: 20%
- Frequency: 20kHz
- Line interval: 0.02
Check out!
- The machine is connected and operating normally, and the lens cover has been removed.
Step 1: Place the candy box
Put the candy box on the laser bed. Since it is flat in the center, the candy box will be well suited for laser marking.
Step 2: Import laser marking file and check out
Load your design into LightBurn software, adjusting its size and position to fit your candy box. Then make sure the laser marking parameters are set correctly.
Step 3: Don't miss the focus
Missing the focus is one of the biggest reasons for laser marking failure. So don’t forget to click the AF button for auto focus.
Of course, manual focus is also effective. Hang the focal stick at the correct position under the lens, and then carefully adjust the Z-axis height. When the end of the focal stick just touches the surface of the candy box, it is in focus!
Auto focus
Manual focus
Focal stick of manual focus
Adjust the focus
Step 4: Ready to start laser marking
Press the frame button and check if the visual red light indicate the right area to be marked. The frame should be located in the middle of the candy box. If not, move the pattern positions until they align.
After checking, close the laser door and begin Aurora Lite’s operation.
Step 5: Monitor the candy box marking process
Stay near the laser machine throughout operation to monitor for any unusual sounds or alarms. This door ensures safety during laser marking, as the energy is potent. Avoid looking directly at the laser beam, even with protective measures in place.
Step 6: Complete the laser marking
Once laser marking is complete, carefully open the door and get your personalized candy box. Laser marking does not produce toxic substances, and you can use the candy box after a simple cleaning!
Come and Try!
Laser marking candy box is a stylish and practical way to keep your essentials organized. With laser marking, you can add a personal touch—whether it’s your name, a logo, or a custom design—making it truly one of a kind. Perfect for work, travel, or as a thoughtful gift, the laser candy box is a simple yet classy everyday accessory!
.png "laser cutter Globle")
