laser cutting machine is widely used for cutting wood model; this time, Thunder laser will cut a huge dinosaur, if you install two red lamps to its eyes and add a speaker, it will be even more terrifying.
Required items:
9mm plywood
4″ laser head
Thunder laser used:
Model: Mars 130
Laser Tube: 100 watt
Setting:
Processing Mode: cut
Speed: 8mm/s
Max power: 75%
Min power: 75%
The settings are only for reference, users need to find the best setting by testing.
After we design the file in CorelDraw, we send the file to laser software directly by clicking the laser plug-in. Then we input the best setting parameters and “Download” the file to the laser cutter.
Place the wood sheet on the machine working table, move the laser head to the right start position, adjust the focal distance, press “Origin” button to set the starting point, then press “Start” to run the job.
After the laser cutter finish working, take out the dinosaur pieces and put them aside.
Build the dinosaur by yourself, you’ll find there’s a lot of fun to do it. Besides, you can also decorate the dinosaur with different color, LED light and acoustic controller.
.png "laser cutter Globle")
