laser cutting machine is widely used for cutting wood model; this time, Thunder laser will cut the universal manipulator!
laser cutter file：Download
Required items:
3mm plywood and some lines
standard laser head
Thunder laser used:
Model: Nova 35laser cutter machine
Laser Tube: 80 watt
Setting:
Processing Mode: cut
Speed: 20mm/s
Max power: 50%
Min power: 55%
The settings are only for reference, users need to find the best setting by testing.
After we design the file in CorelDraw, we send the file to laser software directly by clicking the laser plug-in. Then we input the best setting parameters and “Download” the file to the laser cutter.
Place the wood sheet on the machine working table, move the laser head to the right start position, adjust the focal distance, press “Origin” button to set the starting point, then press “Start” to run the job.
After the laser cutter finish working, take out the universal manipulator pieces and put them aside.
Build the universal manipulator by yourself, you’ll find there’s a lot of fun to do it.
.png "laser cutter Globle")
